Home / Products / Plastic Pipe / Multilayer pipe

Aluminium Foil For PAP Pipes

Aluminium Foil For PAP Pipe

1.Alloy: 1100,3003,8011, 8006
2. Temper: HO


Specifications

1. Propertities:

Our aluminium strip based on a new generation of materials for multilayer pipes offer outstanding advantages such as:

l Excellent roll forming and welding;

l Properties (for TIG, laser and overlap or butt welding) ;

l High strength combined with high elongation;

l Extrmely consistemt material characteristics;

l Good adhesion between aluminum and polyethylene due to special chemical degrease.

 

The slitting line, desined for slitting of narrouw and thin coils in soft conditions, ensures:

l No sticky windings and no staining;

l Less manipulation after sltting, less risk for damage and contamination;

l Uniform tension throughout the whole cil via most accurate control systems;

l Consistent slit edge quality due to accurate tooling: very low burr and edge deformation results in stable behaviour during the process.

 

 

Chemical degreasing line:

Our material for multilayer pipes has a special chemical degreased surface for excellent adhesion between aluminium and polyethylene

l It is proven by peeling tests on different types of pipes that the adhesion with chemically degreased aluminium is much better than with only thermally degreased aluminium.

 


Aluminium Foil For PAP Pipe

Aluminum Alloy

1050, 1200, 3003, 8011, 8006(New!)

Temper

HO

Treatment process

DC &CC

Specification

Thickness

0.1-3.0mm

Width

4-1350mm

Core

150mm, 300mm, 400mm (aluminium or paper core)

O.D.

1200mm-1350mm

Tensile strength

≥120 mpa

Yield strength

< 95 N/mm2

Elongation

> 20%

Application

Five layer composite pipe

Packing

Wooden pallet sutiable for long distance sea transportation  


contact us Wuhan King Plastic Composite Material Co., Ltd.