Perforated aluminum barrier for reinforced PPR pipe

1.Coating material:Polypropylene,QF551

2.Application:PPR pipes
3.EN575/EN546

Inquire Now Next Product

Specifications

Stabi PP-R pipes are made of random copolymer polypropylene (PP-R) inside of which an aluminium layer has been placed. As a result, thermal expansion was reduced and the product’s resistance – enhanced.

Perforated aluminum barrier for reinforced PPR pipe

This type of pipe has a structure of five layers: the inner and outer layers are made of PP-R, which are tightly bonded with PP-based adhesive to the mid-layer of aluminum, which is weII joined through welding.

Greatly reduced linear expansion coefficient, only 1/4 of that of plain PP-R pipes
Improved resistant to impulse under low temperature, resistant to UV-ray
Can work under higher temperature and higher pressure

Perforated aluminum barrier for reinforced PPR pipe
Aluminum Alloy	3003, 8011, 8006(New!)
Temper	HO
Specification	Al Thickness	0.03mm, 0.08mm, 0.10mm, 0.12mm, 0.15mm
	Coating Thickness	40/50 microns on one side or both sides
	Total Thickness	customized
	Width	4-1350mm
Core	150-152mm (aluminium or paper core)
O.D.	600-800mm according to customer needs
Hole Diammeter	0.8mm, 1.4mm, 2.0mm, 2.5mm, 3.5mm
Coating material:	polypropylene copolymer (type ADMER QF551 from company Mitsui)
Coating Density:	0.890 g/cm³
Peel strength	> 6 N/15mm
Tensile strength	125 – 165 N/mm²
Elongation	> 13%
Application	Stabi PPR pipe
Packing	Wooden pallet sutiable for long distance sea transportation