Home / Products / Cable / Copolymer coated steel tape / ECCS Steel Tape With EAA Film Armouring Material For Power Cables

ECCS Steel Tape With EAA Film Armouring Material For Power Cables

As a professional steel composite material manufacturer in China, our copolymer coated steel tape for cables has several advantages for our customers:

1. good quality- we have advanced technologies in manufacturing polymer coated steel tape armouring tape for optical fiber cables and stands in steel industry for more than 10 years.

2. The plastic coated steel tape for cable has a surface coating: polyester one or both side for your choice.

3. The price is competitive because we are manufacturer- we can directly sell to customers without any other third party’s involvement.


Specifications

ABOUT THE COMPANY

Founded for more than 10 years, Wuhan King Plastic Composite Materials Co,. Ltd. is located in the central urban area of Wuhan. As a state-level high-tech enterprise specializing in the R&D and manufacturing all kinds of advanced steel composite materials including  polymer coated steel tape armouring tape for optical fiber cables.

 

PROPERTITIES

EGE plastic clad metal consists of a steel tape coated on both sides with an adherent ethylene copolymer. The copolymer exhibits excellent adhesion to the steel substrate and has the chemical resistance and general characteristics of lower density polyethylene, it bonds to low, linear low, medium and high density polyethylene. The steel is low carbon, electronic chrome-coated steel tempered to T-2 condition for excellent formability and fabrication characteristics.

The slitting line of  polymer coated steel tape armouring tape for optical fiber cables, designed for slitting of narrow and thin coils in soft conditions, ensures:

1. No sticky windings and no staining;

2. Less manipulation after sitting, less risk for damage and contamination;

3. Uniform tension throughout the whole coil via most accurate control systems;

4. Consistent slit edge quality due to accurate tooling: very low burr and edge deformation results in stable behavior during the process.

 

PACKING CONDITIONS

1. Normally, for steel strip, 20MT can be loaded into 20 foot container, we suggest to use 20 foot container, the sea freight rate is much cheaper than 40 foot container.

2. the packing is very strong, which has 3 lays, thick fiber, foam, plastic,enough drying agent, suitable for long distance sea transportation.

3. We use wooden pallet and steel pallet according to customer request;

4. Wooden boxes will be used in the outside packing.

5. We have fixing in the container to avoid any damage during the transportation.

 

ECCS Steel Tape With EAA Film Armouring Material For Power Cables Specifications

S.No.

Item

Unit

Values

1

Appearance

--

Straight, smooth, plain

2

size

length

m

1000~4100

width

mm

12~1000

 

 

 

 

3

 

 

 

 

thickness

 

Steel base

 

mm

0.200±0.015

0.150±0.010

0.100±0.010

0.080±0.010

film

Side A

mm

0.058±0.013

Side B

 

tape

 

mm

0.310±0.015

0.260±0.015

0.210±0.015

0.190±0.015

4

Tensile strength of tape

mpa

70~120

5

Elongation at break

%

15~30

 

6

Bond strength between steel tape and coating

Side A

 

N/cm

 

6.13

Sied B

7

Bond strength of heat seal of tape

N/cm

17.5

8

Cutting strength of heat seal of tape

--

Before breakdown happens to coated steel tape or damage happens between film and steel, damage never happen to the heat seal area.

9

Bond strength of tape after putting into water, 68±1 centigrade,168h

Side A

 

N/cm

 

6.13

Side B

 

10

Jelly resistance,68±1 centigrade,168h

 

Umbrella brand

 

--

 

No bulb, no separation

WT-103

11

Dielectric strength, DC 2KV,1min

--

Without breakdown

12

Corrosion resistance,0.1mol/L,NaOH, 480h

grade

7


contact us Wuhan King Plastic Composite Material Co., Ltd.