Plastic Coated Steel Tape for Cable

As a professional steel composite material manufacturer in China, our copolymer coated steel tape for cables has several advantages for our customers:

1. good quality- we have advanced technologies in manufacturing this product and stands in steel industry for more than 10 years.

2. The plastic coated steel tape for cable has a surface coating: polyester one or both side for your choice.

3. The price is competitive because we are manufacturer- we can directly sell to customers without any other third party’s involvement.

Inquire Now None

Specifications

ABOUT THE COMPANY

Founded for more than 10 years, Wuhan King Plastic Composite Materials Co,. Ltd. is located in the central urban area of Wuhan. As a state-level high-tech enterprise specializing in the R&D and manufacturing all kinds of advanced steel composite materials.

PROPERTITIES

EGE plastic clad metal consists of a steel tape coated on both sides with an adherent ethylene copolymer. The copolymer exhibits excellent adhesion to the steel substrate and has the chemical resistance and general characteristics of lower density polyethylene, it bonds to low, linear low, medium and high density polyethylene. The steel is low carbon, electronic chrome-coated steel tempered to T-2 condition for excellent formability and fabrication characteristics.

The slitting line, designed for slitting of narrow and thin coils in soft conditions, ensures:

1. No sticky windings and no staining;

2. Less manipulation after sitting, less risk for damage and contamination;

3. Uniform tension throughout the whole coil via most accurate control systems;

4. Consistent slit edge quality due to accurate tooling: very low burr and edge deformation results in stable behavior during the process.

PACKING CONDITIONS

1. Normally, for steel strip, 20MT can be loaded into 20 foot container, we suggest to use 20 foot container, the sea freight rate is much cheaper than 40 foot container.

2. the packing is very strong, which has 3 lays, thick fiber, foam, plastic,enough drying agent, suitable for long distance sea transportation.

3. We use wooden pallet and steel pallet according to customer request;

4. Wooden boxes will be used in the outside packing.

5. We have fixing in the container to avoid any damage during the transportation.

Plastic Coated Steel Tape for Cable Specifications
S.No.	Item			Unit	Values
1	Appearance			--	Straight, smooth, plain
2	size	length		m	1000~4100
		width		mm	12~1000
3	thickness	Steel base		mm	0.200±0.015
					0.150±0.010
					0.100±0.010
					0.080±0.010
		film	Side A	mm	0.058±0.013
			Side B
		tape		mm	0.310±0.015
					0.260±0.015
					0.210±0.015
					0.190±0.015
4	Tensile strength of tape			mpa	70~120
5	Elongation at break			%	15~30
6	Bond strength between steel tape and coating		Side A	N/cm	≥6.13
			Sied B
7	Bond strength of heat seal of tape			N/cm	≥17.5
8	Cutting strength of heat seal of tape			--	Before breakdown happens to coated steel tape or damage happens between film and steel, damage never happen to the heat seal area.
9	Bond strength of tape after putting into water, 68±1 centigrade,168h		Side A	N/cm	≥6.13
			Side B
10	Jelly resistance,68±1 centigrade,168h		Umbrella brand	--	No bulb, no separation
			WT-103
11	Dielectric strength, DC 2KV,1min			--	Without breakdown
12	Corrosion resistance,0.1mol/L,NaOH, 480h			grade	7