50-150 Aluminum Foil With PP Coated On Single Side
The Stabi PP-R pipes are manufactured from polypropylene random (PP-R) material and include a layer of both sides coated/laminated with polypropylene aluminum barrier. The aluminum layer is organically bond to the inner PP-R layer using thermal bonding technique under high temperature and pressure and then coated with a layer of PPR again.
Our aluminium strip based on a new generation of materials for multilayer pipes offer outstanding advantages such as:
l Excellent roll forming and welding;
l Properties (for TIG, laser and overlap or butt welding) ;
l High strength combined with high elongation;
l Extrmely consistemt material characteristics;
l Good adhesion between aluminum and polyethylene due to special chemical degrease.
The coating line, specialized in film coating.
The film coating, the film is ADMER QF551 from company Mitsui.
The slitting line, desined for slitting of narrouw and thin coils in soft conditions, ensures:
l No sticky windings and no staining;
l Less manipulation after sltting, less risk for damage and contamination;
l Uniform tension throughout the whole cil via most accurate control systems;
l Consistent slit edge quality due to accurate tooling: very low burr and edge deformation results in stable behaviour during the process.
Single Side Coated Aluminum Foil for PPR Pipes Model 50-150
3003, 8011, 8006(New!)
40/50 microns on one side or both sides
150-152mm (aluminium or paper core)
polypropylene copolymer (type ADMER QF551 from company Mitsui)
> 6 N/15mm
125 – 165 N/mm2
Stabi PPR pipe
Wooden pallet sutiable for long distance sea transportation